1.Powder activated carbon regeneration equipment
This equipment is a patented product, fully considering the characteristics of powdered activated carbon and silica gel products with high density, small particles, and slightly poor fluidity. The characteristics of burning loss and deflagration, and the use of indirect heating, solve the difficulties of low regeneration rate of powdery objects and relatively low performance recovery in the industry. A lot of research has been done on the regeneration and reduction of powdered activated carbon and granular silica gel, and good results have been achieved in practical applications. The products have passed the series certification certificate, and obtained a patent certificate.
The product mainly adopts high-temperature thermal desorption process, indirect heating method, special high-temperature-resistant material, and unique heat-gathering structure, which makes the energy consumption very low, and is supplied to the drying and regeneration sections at the same time.
When the proprietary technology ensures the phenomenon of splashing and leakage during the regeneration process. A variety of control methods and monitoring methods also ensure the hygiene and safety of the regeneration process.
The output of products can be customized according to requirements, and the annual processing capacity of single equipment generally ranges from 2000-8000 tons. It mainly includes feeding, drying, winning, tail gas incineration, desulfurization and denitrification, cooling and screening,
Intelligent control system, etc. Product performance recovery rate and yield rate are much higher than the general level of the industry.

2.Granular activated carbon regeneration equipment
Granular activated carbon regeneration equipment mainly adopts high-temperature thermal desorption and desorption technology, which is the most widely used technology in the regeneration field today. This equipment can use internal heating furnace body, high-quality steel, and the inner lining is resistant High-temperature pouring refractory materials, the main equipment ranges from more than ten meters to one more than ten meters, the frequency conversion controls the feeding amount and speed, and the patented technology does a good job of protecting the furnace head and tail, effectively preventing the phenomenon of blockage and leakage.
According to the annual processing capacity of a single line from several thousand tons to 15,000 tons, it mainly includes feeding, drying, regeneration, tail gas incineration, desulfurization and denitrification, cooling and screening, intelligent control system, etc.
Shandong Walton's complete set of regenerative equipment has accumulated more than ten years of experience in R&D, manufacturing and operation, constantly innovating and exploring, advancing with the times, improving and improving, using its own powerful processing capabilities, product quality
Good, long life, low energy consumption, good recovery rate of product performance and high recovery rate, it is the most advanced generation product in the field of thermal regeneration in the current industry.

3.Columnar activated carbon regeneration equipment
The complete set of columnar activated carbon regeneration equipment mainly adopts high temperature thermal desorption and desorption process, which is the most widely used process in the regeneration field today. This equipment can use internal heating furnace body, high-quality steel, and the inner lining is resistant High-temperature pouring refractory materials, the main equipment ranges from more than 10 meters to more than 20 meters, the frequency conversion controls the feeding amount and speed, and the patented technology does a good job of protecting the furnace head and tail, effectively preventing the phenomenon of blockage and leakage.
According to the annual processing capacity of a single line from several thousand tons to 15,000 tons, it mainly includes feeding, drying, regeneration, tail gas incineration, desulfurization and denitrification, cooling and screening, intelligent control system, etc.
Shandong Walton's complete set of regenerative equipment has more than ten years of experience in R&D, manufacturing, and operation. It is constantly innovating and exploring, advancing with the times, improving and improving, and using its own strong processing capabilities. The product quality is good, the life is long, and the energy consumption is low. The performance recovery rate is good and the recovery rate is high. It is the most advanced generation product in the field of thermal regeneration in the current industry.

4.VOCS exhaust gas treatment equipment
Tail gas treatment system, mainly including incinerator, secondary combustion chamber, SNCR denitrification system, waste heat boiler, quench tower, activated carbon injection tower, dry desulfurization tower, bag filter, fan, wet desulfurization tower, activated carbon adsorption tower, flue gas heater , chimney, etc., the flue gas purification process is as follows: the regenerated flue gas after combustion in the second combustion chamber is subjected to SNCR denitrification at a temperature of 1100°C, and then the waste heat boiler recovers heat to reduce the flue gas temperature to 550°C, and then enters the quench tower , use recycled water to atomize and quench, and ensure that the temperature range of 550°C~200°C is quenched within 1 second, which can effectively prevent the regeneration of dioxins, and then the flue gas enters the dry deacidification tower, sprays quicklime and Powdered activated carbon and other absorbents are deposited on the bag wall of the bag filter to form a filter cake, so that the deposited absorbent continues to absorb gaseous pollutants and dioxins in the flue gas to achieve the purpose of deacidification and removal of dirty dioxins . The absorbent is deposited on the bag wall of the bag filter to form a filter cake, so that the deposited absorbent continues to absorb gaseous pollutants in the flue gas. The flue gas after dust removal by the bag filter is drawn by the induced draft fan into the wet deacidification tower, and further deacidification treatment is carried out by spraying lye. After the deacidification treatment is completed, it enters the mist eliminator for water and gas separation, and then the flue gas is adsorbed by activated carbon The box further absorbs and removes the remaining trace harmful components in the flue gas. The exhaust gas is finally heated to 120 degrees by the flue gas heating device for dewhitening, and then enters the exhaust gas cylinder and is discharged into the atmosphere. The entire flue gas process is under negative pressure. The smoke collection method is hard connection, and the collection efficiency is 100%.

5.Small Hazardous Waste Activated Carbon Recovery Equipment
Shandong Walton experimental furnaces of various specifications, models ranging from DLK-SY10, SY30, SY50 and other series, various specifications, processing output ranging from ten kilograms per hour to one hundred kilograms, can also be based on
Customized for specific needs, can be widely used in factories, laboratories, scientific research institutions, various manufacturers for energy consumption, suitable temperature, output and quality monitoring, can be used as catalysts, activated carbon, slag welding
Physical and chemical experiments on slag, dust silica gel, resin and other materials.
The product normally adopts external heating type or electric heating type, with low energy consumption and high efficiency, which can improve the regeneration efficiency, accurately measure the regeneration value of activated carbon, catalyst, resin, etc., and adapt to the temperature from several hundred to above Thousand degrees adjustable.
At the same time, the product is light, easy to operate, can be moved anywhere, and can be used both indoors and outdoors. It is a small-scale production of high-quality products for recycling experiments of various resources.

6.Mobile Containerized Hazardous Waste Activated Carbon Recovery Equipment
Shandong Walton experimental furnaces of various specifications, models ranging from DLK-SY10, SY30, SY50 and other series, various specifications, processing output ranging from ten kilograms per hour to one hundred kilograms, can also be based on
Customized for specific needs, can be widely used in factories, laboratories, scientific research institutions, various manufacturers for energy consumption, suitable temperature, output and quality monitoring, can be used as catalysts, activated carbon, slag welding
Physical and chemical experiments on slag, dust silica gel, resin and other materials.
The product normally adopts external heating type or electric heating type, with low energy consumption and high efficiency, which can improve the regeneration efficiency, accurately measure the regeneration value of activated carbon, catalyst, resin, etc., and adapt to the temperature from several hundred to above Thousand degrees adjustable.
At the same time, the product is light, easy to operate, can be moved anywhere, and can be used both indoors and outdoors. It is a small-scale production of high-quality products for recycling experiments of various resources.